How To Make Mini Oscilloscope

14 Jun

How To Make Mini Oscilloscope

Oscilloscopes display the change of an electrical signal over time, with voltage and time as the Y- and X-axes, respectively, on a calibrated scale. The waveform can then be analyzed for properties such as amplitude, frequency, rise time, time interval, distortion, and others. Modern digital instruments may calculate and display these properties directly. Originally, calculation of these values required manually measuring the waveform against the scales built into the screen of the instrument

https://youtu.be/c-ic0UaAq-A

Diagram:

Code:


#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <avr/pgmspace.h>               // PROGMEM
#include <EEPROM.h>

#define SCREEN_WIDTH 128                // OLED display width
#define SCREEN_HEIGHT 64                // OLED display height
#define REC_LENGTH 200                  // 

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
#define OLED_RESET     -1      // Reset pin # (or -1 if sharing Arduino reset pin)
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

//
const char vRangeName[10][5] PROGMEM = {"A50V", "A 5V", " 50V", " 20V", " 10V", "  5V", "  2V", "  1V", "0.5V", "0.2V"}; // \0
const char * const vstring_table[] PROGMEM = {vRangeName[0], vRangeName[1], vRangeName[2], vRangeName[3], vRangeName[4], vRangeName[5], vRangeName[6], vRangeName[7], vRangeName[8], vRangeName[9]};
const char hRangeName[8][6] PROGMEM = {" 50ms", " 20ms", " 10ms", "  5ms", "  2ms", "  1ms", "500us", "200us"};          // (48
const char * const hstring_table[] PROGMEM = {hRangeName[0], hRangeName[1], hRangeName[2], hRangeName[3], hRangeName[4], hRangeName[5], hRangeName[6], hRangeName[7]};

int waveBuff[REC_LENGTH];      //  (RAM)
char chrBuff[10];              // 
String hScale = "xxxAs";
String vScale = "xxxx";

float lsb5V = 0.0055549;       // 5V0.005371 V/1LSB
float lsb50V = 0.051513;       // 50V 0.05371

volatile int vRange;           //   0:A50V, 1:A 5V, 2:50V, 3:20V, 4:10V, 5:5V, 6:2V, 7:1V, 8:0.5V
volatile int hRange;           // 0:50m, 1:20m, 2:10m, 3:5m, 4;2m, 5:1m, 6:500u, 7;200u
volatile int trigD;            // 0:1:
volatile int scopeP;           //  0:, 1:, 2:
volatile boolean hold = false; // 
volatile boolean paraChanged = false; //  true
volatile int saveTimer;        // EEPROM
int timeExec;                  // (ms)

int dataMin;                   // (min:0)
int dataMax;                   // (max:1023)
int dataAve;                   // 10 max:10230)
int rangeMax;                  // 
int rangeMin;                  // 
int rangeMaxDisp;              // max100
int rangeMinDisp;              // min
int trigP;                     // 
boolean trigSync;              // 
int att10x;                    // 1

void setup() {
  pinMode(2, INPUT_PULLUP);    // (int0
  pinMode(8, INPUT_PULLUP);    // Select
  pinMode(9, INPUT_PULLUP);    // Up
  pinMode(10, INPUT_PULLUP);   // Down
  pinMode(11, INPUT_PULLUP);   // Hold 
  pinMode(12, INPUT);          // 1/10
  pinMode(13, OUTPUT);         // 

  //     Serial.begin(115200);        // RAM
  if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3C for 128x64
    //       Serial.println(F("SSD1306 failed"));
    for (;;);                               // Don't proceed, loop forever
  }
  loadEEPROM();                             // EEPROM
  analogReference(INTERNAL);                // ADC1.1Vvref)
  attachInterrupt(0, pin2IRQ, FALLING);     // 
  startScreen();                            // 
}

void loop() {
  digitalWrite(13, HIGH);
  setConditions();                          // RAM40
  readWave();                               //  (1.6ms )
  digitalWrite(13, LOW);                    //
  dataAnalize();                            // (0.4-0.7ms)
  writeCommonImage();                       // (4.6ms)
  plotData();                               // (5.4ms+)
  dispInf();                                // (6.2ms)
  display.display();                        // (37ms)
  saveEEPROM();                             // EEPROM
  while (hold == true) {                    // Hold
    dispHold();
    delay(10);
  }
}

void setConditions() {   // 
  // PROGMEM
  strcpy_P(chrBuff, (char*)pgm_read_word(&(hstring_table[hRange])));  // 
  hScale = chrBuff;                                                   // hScale

  // 
  strcpy_P(chrBuff, (char*)pgm_read_word(&(vstring_table[vRange])));  // 
  vScale = chrBuff;                                                   // vScale

  switch (vRange) {              // 
    case 0: {                    // Auto50V
        //        rangeMax = 1023;
        //        rangeMin = 0;
        att10x = 1;              // 
        break;
      }
    case 1: {                    // Auto 5V
        //        rangeMax = 1023;
        //        rangeMin = 0;
        att10x = 0;              // 
        break;
      }
    case 2: {                    // 50V
        rangeMax = 50 / lsb50V;  // 
        rangeMaxDisp = 5000;     // 100
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 1;              // 
        break;
      }
    case 3: {                    // 20V
        rangeMax = 20 / lsb50V;  // 
        rangeMaxDisp = 2000;
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 1;              // 
        break;
      }
    case 4: {                    // 10V
        rangeMax = 10 / lsb50V;  // 
        rangeMaxDisp = 1000;
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 1;              // 
        break;
      }
    case 5: {                    // 5V
        rangeMax = 5 / lsb5V;    // 
        rangeMaxDisp = 500;
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 0;              // 
        break;
      }
    case 6: {                    // 2V
        rangeMax = 2 / lsb5V;    // 
        rangeMaxDisp = 200;
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 0;              // 
        break;
      }
    case 7: {                    // 1V
        rangeMax = 1 / lsb5V;    // 
        rangeMaxDisp = 100;
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 0;              // 
        break;
      }
    case 8: {                    // 0.5V
        rangeMax = 0.5 / lsb5V;  // 
        rangeMaxDisp = 50;
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 0;              // 
        break;
      }
    case 9: {                    // 0.5V
        rangeMax = 0.2 / lsb5V;  // 
        rangeMaxDisp = 20;
        rangeMin = 0;
        rangeMinDisp = 0;
        att10x = 0;              // 
        break;
      }
  }
}

void writeCommonImage() {     // 
  display.clearDisplay();                   // (0.4ms)
  display.setTextColor(WHITE);              // 
  display.setCursor(86, 0);                 // Start at top-left corner
  display.println(F("av    V"));            // 1
  display.drawFastVLine(26, 9, 55, WHITE);  // 
  display.drawFastVLine(127, 9, 55, WHITE); // 

  display.drawFastHLine(24, 9, 7, WHITE);   // Max
  display.drawFastHLine(24, 36, 2, WHITE);  //
  display.drawFastHLine(24, 63, 7, WHITE);  //

  display.drawFastHLine(51, 9, 3, WHITE);   // Max
  display.drawFastHLine(51, 63, 3, WHITE);  //

  display.drawFastHLine(76, 9, 3, WHITE);   // Max
  display.drawFastHLine(76, 63, 3, WHITE);  //

  display.drawFastHLine(101, 9, 3, WHITE);  // Max
  display.drawFastHLine(101, 63, 3, WHITE); //

  display.drawFastHLine(123, 9, 5, WHITE);  // Max
  display.drawFastHLine(123, 63, 5, WHITE); // 

  for (int x = 26; x <= 128; x += 5) {
    display.drawFastHLine(x, 36, 2, WHITE); // ()
  }
  for (int x = (127 - 25); x > 30; x -= 25) {
    for (int y = 10; y < 63; y += 5) {
      display.drawFastVLine(x, y, 2, WHITE); // 3
    }
  }
}

void readWave() {                            // 
  if (att10x == 1) {                         // 1/10
    pinMode(12, OUTPUT);                     // 
    digitalWrite(12, LOW);                   // LOW
  } else {                                   // 
    pinMode(12, INPUT);                      // Hi-z
  }

  switch (hRange) {                          // 

    case 0: {                                // 50ms
        timeExec = 400 + 50;                 // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x07;              // 128 (arduino
        for (int i = 0; i < REC_LENGTH; i++) {     // 200
          waveBuff[i] = analogRead(0);       // 112s
          delayMicroseconds(1888);           // 
        }
        break;
      }

    case 1: {                                // 20ms
        timeExec = 160 + 50;                 // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x07;              // 128 (arduino
        for (int i = 0; i < REC_LENGTH; i++) {     // 200
          waveBuff[i] = analogRead(0);       // 112s
          delayMicroseconds(688);            // 
        }
        break;
      }

    case 2: {                                // 10 ms
        timeExec = 80 + 50;                  // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x07;              // 128 (arduino
        for (int i = 0; i < REC_LENGTH; i++) {     // 200
          waveBuff[i] = analogRead(0);       // 112s
          delayMicroseconds(288);            // 
        }
        break;
      }

    case 3: {                                // 5 ms
        timeExec = 40 + 50;                  // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x07;              // 128 (arduino
        for (int i = 0; i < REC_LENGTH; i++) {     // 200
          waveBuff[i] = analogRead(0);       // 112s
          delayMicroseconds(88);             // 
        }
        break;
      }

    case 4: {                                // 2 ms
        timeExec = 16 + 50;                  // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x06;              // 64 (0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)
        for (int i = 0; i < REC_LENGTH; i++) {     // 200
          waveBuff[i] = analogRead(0);       // 56s
          delayMicroseconds(24);             // 
        }
        break;
      }

    case 5: {                                // 1 ms
        timeExec = 8 + 50;                   // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x05;              // 16 (0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)
        for (int i = 0; i < REC_LENGTH; i++) {     // 200
          waveBuff[i] = analogRead(0);       // 28s
          delayMicroseconds(12);             // 
        }
        break;
      }

    case 6: {                                // 500us
        timeExec = 4 + 50;                   // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x04;              // 16(0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)
        for (int i = 0; i < REC_LENGTH; i++) {     // 200
          waveBuff[i] = analogRead(0);       // 16s
          delayMicroseconds(4);              // 
          // 1.875snop 110.0625s @16MHz)
          asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop");
          asm("nop"); asm("nop"); asm("nop");
        }
        break;
      }

    case 7: {                                // 200us
        timeExec = 2 + 50;                   // (ms) EEPROM
        ADCSRA = ADCSRA & 0xf8;              // 3
        ADCSRA = ADCSRA | 0x02;              // :4(0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)
        for (int i = 0; i < REC_LENGTH; i++) {
          waveBuff[i] = analogRead(0);       // 6s
          // 1.875snop 110.0625s @16MHz)
          asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop");
          asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop");
          asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop");
        }
        break;
      }
  }
}

void dataAnalize() {                   // 
  int d;
  long sum = 0;

  // 
  dataMin = 1023;                         // 
  dataMax = 0;                            // 
  for (int i = 0; i < REC_LENGTH; i++) {  // 
    d = waveBuff[i];
    sum = sum + d;
    if (d < dataMin) {                    // 
      dataMin = d;
    }
    if (d > dataMax) {                    // 
      dataMax = d;
    }
  }

  // 
  dataAve = (sum + 10) / 20;               // 10

  // max,min
  if (vRange <= 1) {                       // Auto1
    rangeMin = dataMin - 20;               // -20
    rangeMin = (rangeMin / 10) * 10;       // 10
    if (rangeMin < 0) {
      rangeMin = 0;                        // 0
    }
    rangeMax = dataMax + 20;               // +20
    rangeMax = ((rangeMax / 10) + 1) * 10; // 10
    if (rangeMax > 1020) {
      rangeMax = 1023;                     // 10201023
    }

    if (att10x == 1) {                            // 
      rangeMaxDisp = 100 * (rangeMax * lsb50V);   // ADC
      rangeMinDisp = 100 * (rangeMin * lsb50V);   // 
    } else {                                      // 
      rangeMaxDisp = 100 * (rangeMax * lsb5V);
      rangeMinDisp = 100 * (rangeMin * lsb5V);
    }
  } else {                                   // 
    // 
  }

  // 
  for (trigP = ((REC_LENGTH / 2) - 51); trigP < ((REC_LENGTH / 2) + 50); trigP++) { // 
    if (trigD == 0) {                        // 0
      if ((waveBuff[trigP - 1] < (dataMax + dataMin) / 2) && (waveBuff[trigP] >= (dataMax + dataMin) / 2)) {
        break;                              // 
      }
    } else {                                // 0
      if ((waveBuff[trigP - 1] > (dataMax + dataMin) / 2) && (waveBuff[trigP] <= (dataMax + dataMin) / 2)) {
        break;
      }                                    // 
    }
  }
  trigSync = true;
  if (trigP >= ((REC_LENGTH / 2) + 50)) {  // 
    trigP = (REC_LENGTH / 2);
    trigSync = false;                      // Unsync
  }
}

void startScreen() {                 // 
  display.clearDisplay();
  display.setTextSize(1);            // 2
  display.setTextColor(WHITE);       //
  display.setCursor(10, 25);         //
  display.println(F("EASY TECH"));   // 
  display.setCursor(10, 45);         //
  display.println(F("Mini OscilLoscope"));
  display.display();                 // 
  delay(5000);
  display.clearDisplay();
  display.setTextSize(1);            // 
}

void dispHold() {                            // Hold
  display.fillRect(32, 12, 24, 8, BLACK);    // 4
  display.setCursor(32, 12);
  display.print(F("Hold"));                  // Hold 
  display.display();                         //
}

void dispInf() {                             // 
  float voltage;
  // 
  display.setCursor(2, 0);                   // 
  display.print(vScale);                     // 
  if (scopeP == 0) {                         // 
    display.drawFastHLine(0, 7, 27, WHITE);  // 
    display.drawFastVLine(0, 5, 2, WHITE);
    display.drawFastVLine(26, 5, 2, WHITE);
  }

  // 
  display.setCursor(34, 0);                  //
  display.print(hScale);                     // (time/div)
  if (scopeP == 1) {                         // 
    display.drawFastHLine(32, 7, 33, WHITE); // 
    display.drawFastVLine(32, 5, 2, WHITE);
    display.drawFastVLine(64, 5, 2, WHITE);
  }

  // 
  display.setCursor(75, 0);                  // 
  if (trigD == 0) {
    display.print(char(0x18));               // 
  } else {
    display.print(char(0x19));               //               
  }
  if (scopeP == 2) {      // 
    display.drawFastHLine(71, 7, 13, WHITE); // 
    display.drawFastVLine(71, 5, 2, WHITE);
    display.drawFastVLine(83, 5, 2, WHITE);
  }

  // 
  if (att10x == 1) {                         // 10
    voltage = dataAve * lsb50V / 10.0;       // 50V
  } else {
    voltage = dataAve * lsb5V / 10.0;        // 5V
  }
  dtostrf(voltage, 4, 2, chrBuff);           // x.xx 
  display.setCursor(98, 0);                  // 
  display.print(chrBuff);                    // 
  //  display.print(saveTimer);                  // 

  // 
  voltage = rangeMaxDisp / 100.0;            // Max
  if (vRange == 1 || vRange > 4) {           // 5VAuto5V
    dtostrf(voltage, 4, 2, chrBuff);         //  *.** 
  } else {                                   //
    dtostrf(voltage, 4, 1, chrBuff);         // **.* 
  }
  display.setCursor(0, 9);
  display.print(chrBuff);                    // Max

  voltage = (rangeMaxDisp + rangeMinDisp) / 200.0; // 
  if (vRange == 1 || vRange > 4) {           // 5VAuto5V
    dtostrf(voltage, 4, 2, chrBuff);         // 2
  } else {                                   //
    dtostrf(voltage, 4, 1, chrBuff);         // 1
  }
  display.setCursor(0, 33);
  display.print(chrBuff);                    // 

  voltage = rangeMinDisp / 100.0;            // Min
  if (vRange == 1 || vRange > 4) {           // 5VAuto5V
    dtostrf(voltage, 4, 2, chrBuff);         // 2
  } else {
    dtostrf(voltage, 4, 1, chrBuff);         // 1
  }
  display.setCursor(0, 57);
  display.print(chrBuff);                    // Min

  // 
  if (trigSync == false) {                   // 
    display.setCursor(60, 55);               // 
    display.print(F("Unsync"));              // Unsync 
  }
}

void plotData() {                    // 
  long y1, y2;
  for (int x = 0; x <= 98; x++) {
    y1 = map(waveBuff[x + trigP - 50], rangeMin, rangeMax, 63, 9); // 
    y1 = constrain(y1, 9, 63);                                     // 
    y2 = map(waveBuff[x + trigP - 49], rangeMin, rangeMax, 63, 9); //
    y2 = constrain(y2, 9, 63);                                     //
    display.drawLine(x + 27, y1, x + 28, y2, WHITE);               // 
  }
}

void saveEEPROM() {                    // EEPROM
  if (paraChanged == true) {           // 
    saveTimer = saveTimer - timeExec;  // 
    if (saveTimer < 0) {               // 
      paraChanged = false;             // 
      EEPROM.write(0, vRange);        // 
      EEPROM.write(1, hRange);
      EEPROM.write(2, trigD);
      EEPROM.write(3, scopeP);
    }
  }
}

void loadEEPROM() {                // EEPROM
  int x;
  x = EEPROM.read(0);             // vRange
  if ((x < 0) || (x > 9)) {        // 0-9
    x = 3;                         // 
  }
  vRange = x;

  x = EEPROM.read(1);             // hRange
  if ((x < 0) || (x > 7)) {        // 0-9
    x = 3;                         // 
  }
  hRange = x;
  x = EEPROM.read(2);             // trigD
  if ((x < 0) || (x > 1)) {        // 0-9
    x = 1;                         // 
  }
  trigD = x;
  x = EEPROM.read(3);             // scopeP
  if ((x < 0) || (x > 2)) {        // 0-9
    x = 1;                         // 
  }
  scopeP = x;
}

void pin2IRQ() {                   // Pin2(int0)
  //pin8,9,10,11Pin2
  //

  int x;                           // 
  x = PINB;                        // B

  if ( (x & 0x07) != 0x07) {       // 3High
    saveTimer = 5000;              // EEPROM(ms
    paraChanged = true;            // ON
  }

  if ((x & 0x01) == 0) {
    scopeP++;
    if (scopeP > 2) {
      scopeP = 0;
    }
  }

  if ((x & 0x02) == 0) {           // UP
    if (scopeP == 0) {             // 
      vRange++;
      if (vRange > 9) {
        vRange = 9;
      }
    }
    if (scopeP == 1) {             // 
      hRange++;
      if (hRange > 7) {
        hRange = 7;
      }
    }
    if (scopeP == 2) {             // 
      trigD = 0;                   // 
    }
  }

  if ((x & 0x04) == 0) {           // DOWN
    if (scopeP == 0) {             // 
      vRange--;
      if (vRange < 0) {
        vRange = 0;
      }
    }
    if (scopeP == 1) {             // 
      hRange--;
      if (hRange < 0) {
        hRange = 0;
      }
    }
    if (scopeP == 2) {             // 
      trigD = 1;                   // 
    }
  }

  if ((x & 0x08) == 0) {           // HOLD
    hold = ! hold;                 // 
  }
}

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

419

420

421

422

423

424

425

426

427

428

429

430

431

432

433

434

435

436

437

438

439

440

441

442

443

444

445

446

447

448

449

450

451

452

453

454

455

456

457

458

459

460

461

462

463

464

465

466

467

468

469

470

471

472

473

474

475

476

477

478

479

480

481

482

483

484

485

486

487

488

489

490

491

492

493

494

495

496

497

498

499

500

501

502

503

504

505

506

507

508

509

510

511

512

513

514

515

516

517

518

519

520

521

522

523

524

525

526

527

528

529

530

531

532

533

534

535

536

537

538

539

540

541

542

543

544

545

546

547

548

549

550

551

552

553

554

555

556

557

558

559

560

561

562

563

564

565

566

567

568

569

570

571

572

573

574

575

576

577

578

579

580

581

582

583

584

585

586

587

#include <Wire.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

#include <avr/pgmspace.h> // PROGMEM

#include <EEPROM.h>

#define SCREEN_WIDTH 128 // OLED display width

#define SCREEN_HEIGHT 64 // OLED display height

#define REC_LENGTH 200 //

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)

#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

const char vRangeName[10][5] PROGMEM = {"A50V", "A 5V", " 50V", " 20V", " 10V", " 5V", " 2V", " 1V", "0.5V", "0.2V"}; // \0

const char * const vstring_table[] PROGMEM = {vRangeName[0], vRangeName[1], vRangeName[2], vRangeName[3], vRangeName[4], vRangeName[5], vRangeName[6], vRangeName[7], vRangeName[8], vRangeName[9]};

const char hRangeName[8][6] PROGMEM = {" 50ms", " 20ms", " 10ms", " 5ms", " 2ms", " 1ms", "500us", "200us"}; // (48

const char * const hstring_table[] PROGMEM = {hRangeName[0], hRangeName[1], hRangeName[2], hRangeName[3], hRangeName[4], hRangeName[5], hRangeName[6], hRangeName[7]};

int waveBuff[REC_LENGTH]; // (RAM)

char chrBuff[10]; //

String hScale = "xxxAs";

String vScale = "xxxx";

float lsb5V = 0.0055549; // 5V0.005371 V/1LSB

float lsb50V = 0.051513; // 50V 0.05371

volatile int vRange; // 0:A50V, 1:A 5V, 2:50V, 3:20V, 4:10V, 5:5V, 6:2V, 7:1V, 8:0.5V

volatile int hRange; // 0:50m, 1:20m, 2:10m, 3:5m, 4;2m, 5:1m, 6:500u, 7;200u

volatile int trigD; // 0:1:

volatile int scopeP; // 0:, 1:, 2:

volatile boolean hold = false; //

volatile boolean paraChanged = false; // true

volatile int saveTimer; // EEPROM

int timeExec; // (ms)

int dataMin; // (min:0)

int dataMax; // (max:1023)

int dataAve; // 10 max:10230)

int rangeMax; //

int rangeMin; //

int rangeMaxDisp; // max100

int rangeMinDisp; // min

int trigP; //

boolean trigSync; //

int att10x; // 1

void setup() {

pinMode(2, INPUT_PULLUP); // (int0

pinMode(8, INPUT_PULLUP); // Select

pinMode(9, INPUT_PULLUP); // Up

pinMode(10, INPUT_PULLUP); // Down

pinMode(11, INPUT_PULLUP); // Hold

pinMode(12, INPUT); // 1/10

pinMode(13, OUTPUT); //

// Serial.begin(115200); // RAM

if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Address 0x3C for 128x64

// Serial.println(F("SSD1306 failed"));

for (;;); // Don't proceed, loop forever

}

loadEEPROM(); // EEPROM

analogReference(INTERNAL); // ADC1.1Vvref)

attachInterrupt(0, pin2IRQ, FALLING); //

startScreen(); //

}

void loop() {

digitalWrite(13, HIGH);

setConditions(); // RAM40

readWave(); // (1.6ms )

digitalWrite(13, LOW); //

dataAnalize(); // (0.4-0.7ms)

writeCommonImage(); // (4.6ms)

plotData(); // (5.4ms+)

dispInf(); // (6.2ms)

display.display(); // (37ms)

saveEEPROM(); // EEPROM

while (hold == true) { // Hold

dispHold();

delay(10);

}

void setConditions() { //

// PROGMEM

strcpy_P(chrBuff, (char*)pgm_read_word(&(hstring_table[hRange]))); //

hScale = chrBuff; // hScale

strcpy_P(chrBuff, (char*)pgm_read_word(&(vstring_table[vRange]))); //

vScale = chrBuff; // vScale

switch (vRange) { //

case 0: { // Auto50V

// rangeMax = 1023;

// rangeMin = 0;

att10x = 1; //

break;

}

case 1: { // Auto 5V

// rangeMax = 1023;

// rangeMin = 0;

att10x = 0; //

break;

}

case 2: { // 50V

rangeMax = 50 / lsb50V; //

rangeMaxDisp = 5000; // 100

rangeMin = 0;

rangeMinDisp = 0;

att10x = 1; //

break;

}

case 3: { // 20V

rangeMax = 20 / lsb50V; //

rangeMaxDisp = 2000;

rangeMin = 0;

rangeMinDisp = 0;

att10x = 1; //

break;

}

case 4: { // 10V

rangeMax = 10 / lsb50V; //

rangeMaxDisp = 1000;

rangeMin = 0;

rangeMinDisp = 0;

att10x = 1; //

break;

}

case 5: { // 5V

rangeMax = 5 / lsb5V; //

rangeMaxDisp = 500;

rangeMin = 0;

rangeMinDisp = 0;

att10x = 0; //

break;

}

case 6: { // 2V

rangeMax = 2 / lsb5V; //

rangeMaxDisp = 200;

rangeMin = 0;

rangeMinDisp = 0;

att10x = 0; //

break;

}

case 7: { // 1V

rangeMax = 1 / lsb5V; //

rangeMaxDisp = 100;

rangeMin = 0;

rangeMinDisp = 0;

att10x = 0; //

break;

}

case 8: { // 0.5V

rangeMax = 0.5 / lsb5V; //

rangeMaxDisp = 50;

rangeMin = 0;

rangeMinDisp = 0;

att10x = 0; //

break;

}

case 9: { // 0.5V

rangeMax = 0.2 / lsb5V; //

rangeMaxDisp = 20;

rangeMin = 0;

rangeMinDisp = 0;

att10x = 0; //

break;

}

void writeCommonImage() { //

display.clearDisplay(); // (0.4ms)

display.setTextColor(WHITE); //

display.setCursor(86, 0); // Start at top-left corner

display.println(F("av V")); // 1

display.drawFastVLine(26, 9, 55, WHITE); //

display.drawFastVLine(127, 9, 55, WHITE); //

display.drawFastHLine(24, 9, 7, WHITE); // Max

display.drawFastHLine(24, 36, 2, WHITE); //

display.drawFastHLine(24, 63, 7, WHITE); //

display.drawFastHLine(51, 9, 3, WHITE); // Max

display.drawFastHLine(51, 63, 3, WHITE); //

display.drawFastHLine(76, 9, 3, WHITE); // Max

display.drawFastHLine(76, 63, 3, WHITE); //

display.drawFastHLine(101, 9, 3, WHITE); // Max

display.drawFastHLine(101, 63, 3, WHITE); //

display.drawFastHLine(123, 9, 5, WHITE); // Max

display.drawFastHLine(123, 63, 5, WHITE); //

for (int x = 26; x <= 128; x += 5) {

display.drawFastHLine(x, 36, 2, WHITE); // ()

}

for (int x = (127 - 25); x > 30; x -= 25) {

for (int y = 10; y < 63; y += 5) {

display.drawFastVLine(x, y, 2, WHITE); // 3

}

void readWave() { //

if (att10x == 1) { // 1/10

pinMode(12, OUTPUT); //

digitalWrite(12, LOW); // LOW

} else { //

pinMode(12, INPUT); // Hi-z

}

switch (hRange) { //

case 0: { // 50ms

timeExec = 400 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x07; // 128 (arduino

for (int i = 0; i < REC_LENGTH; i++) { // 200

waveBuff[i] = analogRead(0); // 112s

delayMicroseconds(1888); //

}

break;

}

case 1: { // 20ms

timeExec = 160 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x07; // 128 (arduino

for (int i = 0; i < REC_LENGTH; i++) { // 200

waveBuff[i] = analogRead(0); // 112s

delayMicroseconds(688); //

}

break;

}

case 2: { // 10 ms

timeExec = 80 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x07; // 128 (arduino

for (int i = 0; i < REC_LENGTH; i++) { // 200

waveBuff[i] = analogRead(0); // 112s

delayMicroseconds(288); //

}

break;

}

case 3: { // 5 ms

timeExec = 40 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x07; // 128 (arduino

for (int i = 0; i < REC_LENGTH; i++) { // 200

waveBuff[i] = analogRead(0); // 112s

delayMicroseconds(88); //

}

break;

}

case 4: { // 2 ms

timeExec = 16 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x06; // 64 (0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)

for (int i = 0; i < REC_LENGTH; i++) { // 200

waveBuff[i] = analogRead(0); // 56s

delayMicroseconds(24); //

}

break;

}

case 5: { // 1 ms

timeExec = 8 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x05; // 16 (0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)

for (int i = 0; i < REC_LENGTH; i++) { // 200

waveBuff[i] = analogRead(0); // 28s

delayMicroseconds(12); //

}

break;

}

case 6: { // 500us

timeExec = 4 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x04; // 16(0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)

for (int i = 0; i < REC_LENGTH; i++) { // 200

waveBuff[i] = analogRead(0); // 16s

delayMicroseconds(4); //

// 1.875snop 110.0625s @16MHz)

asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop");

asm("nop"); asm("nop"); asm("nop");

}

break;

}

case 7: { // 200us

timeExec = 2 + 50; // (ms) EEPROM

ADCSRA = ADCSRA & 0xf8; // 3

ADCSRA = ADCSRA | 0x02; // :4(0x1=2, 0x2=4, 0x3=8, 0x4=16, 0x5=32, 0x6=64, 0x7=128)

for (int i = 0; i < REC_LENGTH; i++) {

waveBuff[i] = analogRead(0); // 6s

// 1.875snop 110.0625s @16MHz)

asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop"); asm("nop");

}

break;

}

void dataAnalize() { //

int d;

long sum = 0;

dataMin = 1023; //

dataMax = 0; //

for (int i = 0; i < REC_LENGTH; i++) { //

d = waveBuff[i];

sum = sum + d;

if (d < dataMin) { //

dataMin = d;

}

if (d > dataMax) { //

dataMax = d;

}

dataAve = (sum + 10) / 20; // 10

// max,min

if (vRange <= 1) { // Auto1

rangeMin = dataMin - 20; // -20

rangeMin = (rangeMin / 10) * 10; // 10

if (rangeMin < 0) {

rangeMin = 0; // 0

}

rangeMax = dataMax + 20; // +20

rangeMax = ((rangeMax / 10) + 1) * 10; // 10

if (rangeMax > 1020) {

rangeMax = 1023; // 10201023

}

if (att10x == 1) { //

rangeMaxDisp = 100 * (rangeMax * lsb50V); // ADC

rangeMinDisp = 100 * (rangeMin * lsb50V); //

} else { //

rangeMaxDisp = 100 * (rangeMax * lsb5V);

rangeMinDisp = 100 * (rangeMin * lsb5V);

}

} else { //

}

for (trigP = ((REC_LENGTH / 2) - 51); trigP < ((REC_LENGTH / 2) + 50); trigP++) { //

if (trigD == 0) { // 0

if ((waveBuff[trigP - 1] < (dataMax + dataMin) / 2) && (waveBuff[trigP] >= (dataMax + dataMin) / 2)) {

break; //

}

} else { // 0

if ((waveBuff[trigP - 1] > (dataMax + dataMin) / 2) && (waveBuff[trigP] <= (dataMax + dataMin) / 2)) {

break;

} //

}

trigSync = true;

if (trigP >= ((REC_LENGTH / 2) + 50)) { //

trigP = (REC_LENGTH / 2);

trigSync = false; // Unsync

}

void startScreen() { //

display.clearDisplay();

display.setTextSize(1); // 2

display.setTextColor(WHITE); //

display.setCursor(10, 25); //

display.println(F("EASY TECH")); //

display.setCursor(10, 45); //

display.println(F("Mini OscilLoscope"));

display.display(); //

delay(5000);

display.clearDisplay();

display.setTextSize(1); //

}

void dispHold() { // Hold

display.fillRect(32, 12, 24, 8, BLACK); // 4

display.setCursor(32, 12);

display.print(F("Hold")); // Hold

display.display(); //

}

void dispInf() { //

float voltage;

display.setCursor(2, 0); //

display.print(vScale); //

if (scopeP == 0) { //

display.drawFastHLine(0, 7, 27, WHITE); //

display.drawFastVLine(0, 5, 2, WHITE);

display.drawFastVLine(26, 5, 2, WHITE);

}

display.setCursor(34, 0); //

display.print(hScale); // (time/div)

if (scopeP == 1) { //

display.drawFastHLine(32, 7, 33, WHITE); //

display.drawFastVLine(32, 5, 2, WHITE);

display.drawFastVLine(64, 5, 2, WHITE);

}

display.setCursor(75, 0); //

if (trigD == 0) {

display.print(char(0x18)); //

} else {

display.print(char(0x19)); //

}

if (scopeP == 2) { //

display.drawFastHLine(71, 7, 13, WHITE); //

display.drawFastVLine(71, 5, 2, WHITE);

display.drawFastVLine(83, 5, 2, WHITE);

}

if (att10x == 1) { // 10

voltage = dataAve * lsb50V / 10.0; // 50V

} else {

voltage = dataAve * lsb5V / 10.0; // 5V

}

dtostrf(voltage, 4, 2, chrBuff); // x.xx

display.setCursor(98, 0); //

display.print(chrBuff); //

// display.print(saveTimer); //

voltage = rangeMaxDisp / 100.0; // Max

if (vRange == 1 || vRange > 4) { // 5VAuto5V

dtostrf(voltage, 4, 2, chrBuff); // *.**

} else { //

dtostrf(voltage, 4, 1, chrBuff); // **.*

}

display.setCursor(0, 9);

display.print(chrBuff); // Max

voltage = (rangeMaxDisp + rangeMinDisp) / 200.0; //

if (vRange == 1 || vRange > 4) { // 5VAuto5V

dtostrf(voltage, 4, 2, chrBuff); // 2

} else { //

dtostrf(voltage, 4, 1, chrBuff); // 1

}

display.setCursor(0, 33);

display.print(chrBuff); //

voltage = rangeMinDisp / 100.0; // Min

if (vRange == 1 || vRange > 4) { // 5VAuto5V

dtostrf(voltage, 4, 2, chrBuff); // 2

} else {

dtostrf(voltage, 4, 1, chrBuff); // 1

}

display.setCursor(0, 57);

display.print(chrBuff); // Min

if (trigSync == false) { //

display.setCursor(60, 55); //

display.print(F("Unsync")); // Unsync

}

void plotData() { //

long y1, y2;

for (int x = 0; x <= 98; x++) {

y1 = map(waveBuff[x + trigP - 50], rangeMin, rangeMax, 63, 9); //

y1 = constrain(y1, 9, 63); //

y2 = map(waveBuff[x + trigP - 49], rangeMin, rangeMax, 63, 9); //

y2 = constrain(y2, 9, 63); //

display.drawLine(x + 27, y1, x + 28, y2, WHITE); //

}

void saveEEPROM() { // EEPROM

if (paraChanged == true) { //

saveTimer = saveTimer - timeExec; //

if (saveTimer < 0) { //

paraChanged = false; //

EEPROM.write(0, vRange); //

EEPROM.write(1, hRange);

EEPROM.write(2, trigD);

EEPROM.write(3, scopeP);

}

void loadEEPROM() { // EEPROM

int x;

x = EEPROM.read(0); // vRange

if ((x < 0) || (x > 9)) { // 0-9

x = 3; //

}

vRange = x;

x = EEPROM.read(1); // hRange

if ((x < 0) || (x > 7)) { // 0-9

x = 3; //

}

hRange = x;

x = EEPROM.read(2); // trigD

if ((x < 0) || (x > 1)) { // 0-9

x = 1; //

}

trigD = x;

x = EEPROM.read(3); // scopeP

if ((x < 0) || (x > 2)) { // 0-9

x = 1; //

}

scopeP = x;

}

void pin2IRQ() { // Pin2(int0)

//pin8,9,10,11Pin2

int x; //

x = PINB; // B

if ( (x & 0x07) != 0x07) { // 3High

saveTimer = 5000; // EEPROM(ms

paraChanged = true; // ON

}

if ((x & 0x01) == 0) {

scopeP++;

if (scopeP > 2) {

scopeP = 0;

}

if ((x & 0x02) == 0) { // UP

if (scopeP == 0) { //

vRange++;

if (vRange > 9) {

vRange = 9;

}

if (scopeP == 1) { //

hRange++;

if (hRange > 7) {

hRange = 7;

}

if (scopeP == 2) { //

trigD = 0; //

}

if ((x & 0x04) == 0) { // DOWN

if (scopeP == 0) { //

vRange--;

if (vRange < 0) {

vRange = 0;

}

if (scopeP == 1) { //

hRange--;

if (hRange < 0) {

hRange = 0;

}

if (scopeP == 2) { //

trigD = 1; //

}

if ((x & 0x08) == 0) { // HOLD

hold = ! hold; //

}

How To Make Mini Oscilloscope

Tapas Mondal
visit:

0 Comments

Shipped By

Follow Us

How To Make Mini Oscilloscope

Tapas Mondal visit:

0 Comments

Tapas Mondal
visit: