74HC595 Serial to Parallel Shifting IC

20.00 (Inc. GST)
You save

  • 8-bit, Serial In – Parallel out Shift register
  • Operating Voltage: 2V to 6V
  • Power Consumption: 80uA
  • Output source/sink current: 35mA
  • Output Voltage is equal to Operating voltage
  • Minimum high-level Input Voltage: 3.15V @(Vcc=4.5V)
  • Maximum low-level Input Voltage: 1.35V @(Vcc=4.5V)
  • Can be easily cascaded with more IC to get more outputs
  • Maximum Clock Frequency: 25Mhz @4.5V
  • Available in 16-pin PDIP, GDIP, PDSO packages

In stock

Compare
SKU: 333163 Category: Tag:

Description

DESCRIPTION:-

The 74HC595N is a simple 8-bit shift register IC. Simply put, this shift register is a device that allows additional inputs or outputs to be added to a microcontroller by converting data between parallel and serial formats. Your chosen microprocessor is able to communicate with The 74HC595N using serial information then gathers or outputs information in a parallel (multi-pin) format. Essentially it takes 8 bits from the serial input and then outputs them to 8 pins.

This small DIP packaged IC contains an 8-bit, serial-in-parallel-out shift register that feeds an 8-bit D-type storage register with parallel 3-state outputs.

 

Pin Configuration:-

Pin Number Pin Name Description
1,2,3,4,5,6,7 Output Pins (Q1 to Q7) The 74hc595 has 8 output pins out of which 7 are these pins. They can be controlled serially
8 Ground Connected to the Ground  of the circuit
9 (Q7) Serial Output This pin is used to connect more than one 74hc595 as cascading
10 (MR) Master Reset Resets all outputs as low. Must be held high for normal operation
11 (SH_CP) Clock This is the clock pin to which the clock signal has to be provided from MCU/MPU
12 (ST_CP) Latch The Latch pin is used to update the data to the output pins. It is active high
13 (OE) Output Enable The Output Enable is used to turn off the outputs. Must be held low for normal operation
14 (DS) Serial Data This is the pin to which data is sent, based on which the 8 outputs are controlled
15 (Q0) Output The first output pin.
16 Vcc This pin powers the IC, typically +5V is used.

 

Features  :- 
  • 8-bit, Serial In – Parallel out Shift register
  • Operating Voltage: 2V to 6V
  • Power Consumption: 80uA
  • Output source/sink current: 35mA
  • Output Voltage is equal to Operating voltage
  • Minimum high-level Input Voltage: 3.15V @(Vcc=4.5V)
  • Maximum low-level Input Voltage: 1.35V @(Vcc=4.5V)
  • Can be easily cascaded with more IC to get more outputs
  • Maximum Clock Frequency: 25Mhz @4.5V
  • Available in 16-pin PDIP, GDIP, PDSO packages

Where to Use 74HC595 IC:-

The 74HC595 is an 8-bit Serial In – Parallel Out Shift Register, i.e. it can receive (input) data serially and control 8 output pins in parallel. This comes in very handy where do not have enough GPIO pins on our MCU/MPU to control the required number of outputs. It is often used in projects where relatively a large number of LED’s has to be controlled through the Microcontroller. It can also be used to interface LCD screen since they can acts as the data bit for the LCD displays. It can also be used to control 5V loads like relays through a 3.3V microcontroller since the high-level voltage is only 3.15. So if you are looking for an IC to save on your GPIO pins on the Microcontroller then this IC might be the right choice for you.

How to Use a 74HC595 IC:-

The 74HC595 shift register is commonly used with microcontrollers or microprocessors to expand the GIPO functionalities. It requires only 3 pins connected to the MCU, which are Clock, Data and Latch. It has a wide operating voltage from 2V to 6V. An application circuit of the IC is shown below:

Package Includes:-

  • 1 x  74HC595 IC

Additional information

Weight 5 g
Dimensions 20 × 14 × 10 mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

New Product Tab

Return and Refund Policy Last updated date: September 25, 2022 1. GENERAL a. This website with the URL of https://roboman.in/ (“Website/Site”) is operated by EASY TECH ELECTRONICS (“We/Our/Us”). b. We are committed to providing Our customers with the highest quality Products and Services. However, on rare occasions, Products and Services may be found to be faulty or deficient. In such cases, We offer return and refund facilities in accordance with this Refund Policy (“Policy”). c. You are advised to read Our Terms and Conditions along with this Policy at the following webpage: https://roboman.in/term-of-service/. d. By using this website, You agree to be bound by the terms contained in this Policy without modification. If You do not agree to the terms contained in this Policy, You are advised not to transact on this website. e. You may initiate the return and refund procedure within the following timeline and rules: Electronics Item : 7 days replacement. f. Please read this Policy before making a purchase or availing of any service on this Website, so that You understand Your rights as well as what You can expect from Us if You are not happy with Your purchase. 2. DEFINITIONS a. “Business Days” – means a day that is not a Saturday, Sunday, public holiday, or bank holiday in India or in the state where our office is located. b. “Customer” – means a person who buys any goods or availing services for consideration but does not include a person who purchases such goods or avail services to resell them. c. “Date of Transaction” – means the date of purchase of any product or service, which includes the date of any renewal processed in accordance with the terms and conditions of the applicable product or service agreement. d. “Website” – means this website with the URL: https://roboman.in/. 3. REFUNDS RULES a. Every effort is made so as to service the orders placed, as per the specifications and timelines mentioned with respect to a Products and Services. If due to any unforeseen circumstances or limitations from Our side, the order is not shipped or delivered then such order stands cancelled, and the amount paid by You is refunded. b. You can cancel the order after the Date of Transaction and prior to the dispatch of the product. The order cannot be cancelled once the dispatch has been initiated. c. We will not process a return if You have placed the order for the wrong product model, colour, or incorrect product or service. d. When you make a qualifying return, We will refund the full amount, less the original shipping and handling charges. e. Return or refund shall only be considered once the Customer concerned produces relevant documents and proof. f. Return and refund shall be subject to testing and verifying the alleged fault by an authorized person on behalf of Us. g. If following the testing process, the product is found to be in good working order without defects, We will return the product to you, and the carriage costs of this return will be Your responsibility. h. The product will be eligible for replacement only if the same product/model is available in stock. In case the same product/model is out of stock, a refund shall be provided. i. Once qualified, the refunds are applied to the original payment option. j. Please be informed that the products purchased using the Cash on Delivery option will be refunded to the Bank account with the details provided by you to Us. k. Customers who wish to make a warranty claim must comply with the manufacturer’s instructions and warranty procedure. If the details of the product manufacturer are not available, we will help you with such details to directly connect with the manufacturer to resolve your issues. l. Please note that the Digital Products are non-returnable unless such Digital Product is materially non-compliant with its specifications or the physical media on which it is supplied is defective. 4. PRODUCTS DAMAGED DURING THE TRANSIT a. Replacement can be made if the Customer establishes that the product was delivered in defective condition or has physical damage within 24 hours of receipt of the product. b. We will organize to repair the damaged product or collect it and replace it with an equivalent product, or provide a refund, provided that You contact us within 24 hours of receipt of the product. c. Any damaged product must be returned in the condition it was in when you received it, together with any packaging and other items which You received with the damaged product. 5. ORDER NOT CONFIRMED BUT AMOUNT DEDUCTED a. If the amount has been deducted and the order is not confirmed, please do contact Your respective bank. It takes 7 (seven) Business Days to reverse back the amount by the respective bank. b. If the issue has not been resolved within 7 (seven) Business Days, you can contact Our customer care support as follows: [email protected],. 6. EXEMPTIONS a. Notwithstanding the other provisions of this Policy, We may refuse to provide repair, replacement, or refund for a product or service you purchased if: I. the product purchased is sale items or promotional items (discounts, giveaways, etc.). II. if the product has been used or opened. III. the products are not in the same condition as when they were delivered. IV. misused the product in a way that caused the problem. V. You knew or were made aware of the problem(s) with the product or service before you purchased it. VI. Gifts or free services. VII. the product is broken, tampered or damaged. VIII. the product is returned after the return window is closed or the Refund Period expires. IX. Any other exceptions apply under the Consumer Protection Act, 2019. b. Apart from the aforementioned goods and services, the following goods and services are not eligible for a refund: old and used products. 7. RULES OF RETURNING THE PRODUCT a. The request for cancellation of the products can be made in the following manner: Click on my account and select my order and select the order you placed that you wish to cancel. You can send an email to [email protected] b. You are eligible to return the product only if You return the products in the same condition in which You received them. c. Pack the product properly and label the product with the order number, return address and Your address. d. The product shall be returned in its original packaging. e. We do not accept liability for packages damaged during the return transit. It is the customer’s responsibility to pack the product properly to prevent any damage during transit. f. The eligible returns once confirmed from Our end can be sent to the following address: Dag No-06, Police Fari, Kanaipur, Hooghly, West-Bengal, Pin-712234, India g. The order returned must accompany all accessories (including freebies) which were serviced along with the order or else the cost of the accessories shall be recovered from the refund amount. h. On receipt of the returned product, We will test it to identify the fault You have notified Us. i. A copy of the receipt or invoice shall be attached along with the returned product. j. You will receive an email or SMS notification at Your email address or mobile number provided to Us. 8. SHIPPING COST a. We provide all support to return the product. However, any cost incurred on the packaging or returning of the product shall be borne by the customer itself. b. If the customer is sending back the product, the risk of loss lies with the customer. Proof of postage is not proof of delivery, and You are therefore strongly advised to send Your package by recorded delivery, registered post, or courier. 9. YOUR DATA The privacy of your data supplied to Us during the return and refund procedure is also governed by our privacy policy, which can be accessed under the following link: https://roboman.in/privacy-policy. 10. RESPONSE TIME a. Refunds are normally processed within 7 Business Days after the completion of quality checks of the product returned. b. Refunds are normally processed within 7 Business Days after checking the veracity of the refund request. c. The period of refund may also depend on various banking and payment channels, and We will not be liable for any errors or delays in a refund due to banks or third-party service providers. 11. CANCELLATION OF RETURN REQUEST A request for return or refund once made can be cancelled by contacting customer care at [email protected],. 12. REFUSAL OF RETURN OR REFUND REQUEST We reserve the right to refuse or cancel any return request if such a request is not in compliance with this Policy or applicable laws. 15. CONTACT US For any feedback, concern, or query, You may please reach out to Us on the contact details below. Customer Care: [email protected],

Manage push notifications

notification icon
We would like to show you notifications for the latest news and updates.
notification icon
You are subscribed to notifications
notification icon
We would like to show you notifications for the latest news and updates.
notification icon
You are subscribed to notifications
0
    0
    Your Cart
    Your cart is emptyReturn to Shop